LED fX Sample Effects
LED Lighting Effect Sample Animations From Effects Chip 1
The LED fX contains a total of 37 effects.
Below is a sample summary of all those effects, the best way we can represent them on the web. Exact timings cannot be reproduced entirely in these sample images. The graphic animations and text descriptions should give you insight as to what each effect will look like in your completed kit (available as a bare board where you supply all the parts or a full kit of components).
LED Effects Chip 01 – Effect 00
Alternate all LEDs on & off from left bank to right bank at 1Hz rate.
LED Effects Chip 01 – Effect 01
Alternate multiple flashes between left LEDs and right LEDs.
LED Effects Chip 01 – Effect 02
Binary Counting: Binary counting on left LED bank and right LED bank has inverted output.
Note: Sample web display only shows partial count, product actually counts from 0 to 255 in binary.
LED Effects Chip 01 – Effect 03
Single LED walks from left to right in each left & right display panel at 250mS rate.
LED Effects Chip 01 – Effect 04
Single LED walks from left to right across both display panels at 250mS rate.
LED Effects Chip 01 – Effect 05
Wig-Wag pattern on both display banks at 250mS rate.
LED Effects Chip 01 – Effect 06
Wig-Wag pattern on both display banks at 125mS rate.
LED Effects Chip 01 – Effect 07
Wig-Wag pattern on both display banks at 75mS rate.
LED Effects Chip 01 – Effect 08-15
LED bounces back and forth across both display panels. Rate is fastest on option 8 and gradually slows down as you move through switch setting 9, 10, 11, 12, 13, 14 and 15.
LED Effects Chip 01 – Effect 09-15
LED bounces back and forth across both display panels. Rate is fastest on option 8 and gradually slows down as you move through switch settings 9, 10, 11, 12, 13, 14, and 15.
LED Effects Chip 01 – Effect 16
LED bounces back and forth across both display panels, slowly ramping up in speed. Resets to slow after achieving maximum speed.
LED Effects Chip 01 – Effect 17
LED bounces back and forth across both display panels, slowly ramping up in speed. After reaching maximum speed, slowly ramps down speed.
LED Effects Chip 01 – Effect 18
Random LED combinations on both bank of LEDs.
LED Effects Chip 01 – Effect 19
LEDs sequentially light from center of display to edge in each bank at 50mS rate.
LED Effects Chip 01 – Effect 20
LEDs sequentially light from the center of display to edge in each bank at 25mS rate.
LED Effects Chip 01 – Effect 21
Alternating pairs of LEDs toggle in and out on each bank of LEDs at 75mS rate.
LED Effects Chip 01 – Effect 22
LEDs light from outer edges of the boards towards the board center on each bank.
LED Effects Chip 01 – Effect 23
LEDs light from outer edges of the boards towards the board center on each bank, process reverse upon reaching the center.
LED Effects Chip 01 – Effect 24
Strobe Effect: All LEDs blink on and off with 1mS delay.
LED Effects Chip 01 – Effect 25
Strobe Effect: All LEDs blink on and off with 5mS delay.
LED Effects Chip 01 – Effect 26
Strobe Effect: All LEDs blink on and off with 10mS delay.
LED Effects Chip 01 – Effect 27
Strobe Effect: All LEDs blink on and off with 20mS delay.
LED Effects Chip 01 – Effect 28
Strobe Effect: All LEDs blink on and off with 30mS delay.
LED Effects Chip 01 – Effect 29
Strobe Effect: All LEDs blink on and off with 50mS delay.
LED Effects Chip 01 – Effect 30
Strobe Effect: All LEDs blink on and off with 75mS delay.
LED Effects Chip 01 – Effect 31
Strobe Effect: All LEDs blink on and off with 100mS delay.
LED Effects Chip 01 – Effect 32
Pair of LEDs moves across display from right to left at 120mS rate.
LED Effects Chip 01 – Effect 33
Pair of LEDs moves across display from right to left at 60mS rate.
LED Effects Chip 01 – Effect 34
Pair of LEDs move across the display from right to left at 40mS rate.
LED Effects Chip 01 – Effect 35
Pair of LEDs moves across display from right to left at 20mS rate.
LED Effects Chip 01 – Effect 36
Pair of LEDs move across the display from right to left at 10mS rate.
LED Effects Chip 01 – Effect 37
LEDs incrementally count from left to right, pausing between totals and restarting.